Fluke 725 P27EX
Fluke 725 P27EX3
Fluke 725 P27EX2
Roll over image to zoom in
Click to open expanded view

Fluke 725/P27EX

$2,778.00

In stock

Add to wishlist
Compare
Add to wishlist
Compare
Add to quote
SKU: 2718377 Category: Tag:
  • Fluke Model 725
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms
  • Source/simulate volts, mA, RTDs, thermocouples, frequency, and ohms
  • Measure and source pressure using Fluke 700P series pressure modules
  • Dual display shows input and output
  • Built in 24V loop power supply
  • Programmable step and ramp for automated testing
  • Powered by 4 AA batteries (25 hours typical operation)
  • Size/weight 7.9 x 3.8 x 1.9

>

Each Unit Includes

  • 300 PSI Pressure Module
  • TL75 Test Leads
  • AC70 Test Clips
  • One pair of stackable test leads
  • Product Overview Manual
  • Users Manual
  • CD-Rom
  • 3 Year Warranty
  • CE and CSA markings

>

Measurement Accuracy
Voltage DC 30.000 V 0.02% 2 counts (upper display)
30.000 V 0.02% 2 counts (lower display)
100.00 mV 0.02% 2 counts
-10.00 mV to 75.00 mV 0.025% 1 count (via TC connector)
Current DC 24.000 mA 0.02% 2 counts
Resistance 0.0 to 400.0 Ω 0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire)
401 to 1500 Ω 0.5 Ω (4-wire), 1 Ω (2- and 3-wire)
1500 to 3200 Ω 1 Ω (4-wire), 1.5 Ω (2- and 3-wire)
Frequency 2.0 to 1000.0 CPM 0.05% 1 count
1.0 to 1100.0 Hz 0.05% 1 count
1.00 to 10.00 kHz 0.05% 1 count
Sensitivity 1 V peak-to-peak-minimum
Pressure Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure.
Source Accuracy
Voltage DC 100.00 mV 0.02% 2 counts
10.000 V 0.02% 2 counts
-10.00 mV to 75.00 mV 0.025% 1 count (via TC connector)
Current DC 24.000 mA (source) 0.02% 2 counts
24.000 mA (simulate) 0.02% 2 counts
Resistance 15.0 to 400.0 Ω 0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA)
401 to 1500 Ω 0.5 Ω (excitation current 0.05 to 0.8 mA)
1500 to 3200 Ω 1 Ω (excitation current 0.05 to 0.4 mA)
Frequency 2.0 to 1000.0 CPM 0.05%
1.0 to 1100.0 Hz 0.05%
1.00 to 10.00 kHz 0.25%
Waveform 5 V p-p squarewave, -0.1 V offset
RTDs and Thermocouples
Measure accuracy NI-120 0.2°C
PT-100 (385) 0.33°C
PT-100 (393) 0.3°C
PT-100 (JIS) 0.3°C
PT-200 (385) 0.2°C
PT-500 (385) 0.3°C
PT-1000 (385) 0.2°C
Resolution 0.1°C
J 0.7°C
K 0.8°C
T 0.8°C
E 0.7°C
R 1.8°C
S 1.5°C
B 1.4°C
L 0.7°C
U 0.75°C
N 0.9°C
Resolution J, K, T, E, L, N, U: 0.1°C, 0.1°F B, R, S: 1°C, 1°F
XK 0.6°C
BP 1.2°C
Source accuracy NI-120 0.2°C
PT-100 (385) 0.33°C
PT-100 (393) 0.3°C
PT-100 (JIS) 0.3°C
PT-200 (385) 0.2°C
PT-500 (385) 0.3°C
PT-1000 (385) 0.2°C
Resolution 0.1°C
Accuracy stated for 4-wire measurement.
J 0.7°C
K 0.8°C
T 0.8°C
E 0.7°C
R 1.4°C
S 1.5°C
B 1.4°C
L 0.7°C
U 0.75°C
N 0.9°C
Resolution J, K, T, E, L, N, U: 0.1°C, B, R, S: 1°C
XK 0.6°C
BP 1.2°C
Specifications
Ramp functions Source functions Voltage, current, resistance, frequency, temperature
Ramps Slow ramp, Fast ramp, 25% step-ramp
Loop power function Voltage 24 V
Accuracy 10%
Maximum current 22 mA, short circuit protected
Step functions Source functions Voltage, current, resistance, frequency, temperature
Steps 25% of range, 100% of range
Environmental Specifications
Operating temperature -10°C to 55°C
Storage temperature -20°C to 71°C
Operating altitude 3000 m
Safety Specifications
Agency approvals EN 61010-1:1993, ANSI/ISA S82.01-1994, CAN/CSA C22.2 No 1010.1:1992
Mechanical and General Specifications
Size 130 x 236 x 61 mm
Weight 0.65 kg
Batteries 4 AA alkaline batteries
Battery replacement Separate battery compartment, accessable without breaking calibration seal
Side port connections Pressure module connector, also used for remote real-time programming

Related products

Main Menu

Fluke 725/P27EX

$2,778.00

Add to Cart